English

Welding Machine Hot Start Lift Tig Stick Welder with Electrode Holder,Work Clamp, Input Power Adapter Cable and Brush

Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 160A, and it can handle alkaline welding rods! !! Also, because of the high current, extending the weld ca
Description
  • Hot start function: The no-load voltage of the product reaches 78V, the current value is increased momentarily at the start of welding, and the arc start can be performed smoothly. ★ Arc force function: As the welding rod melts, welding continues to a certain extent even if the distance from the object is increased. Equipped with a state-of-the-art IGBT inverter protection system and radiator, the welding rod does not stick easily at the start of welding, and good penetration can be obtained
  • [Compatible with φ4.0 welding rod] Most electric welders display a current of 200 A, but the actual current may be only about 100 to 140 A. The current of this product can reach up to 160A, and it can handle alkaline welding rods! !! Also, because of the high current, extending the weld cable to 50 meters does not attenuate the current. [Specifications] Weldable plate thickness: Lift TIG 1-6 mm, ARC / MMA 1-10 mm. Applicable welding rod: φ1.6 ~ 4.0. Applicable tungsten needle: φ1.0 / 1.6
  • [Power supply sensitivity] Both 100V and 200V are used. 100V / 200V is automatically switched according to the power supply. If the input voltage is 100V, the panel will automatically display 110V. If the input voltage is 200V, the panel will automatically display 220V. [Affiliated products] Arc welding ground clamp, welding rod holder cable, conversion line adapter
  • [Lift TIG welding] Lift TIG welding is possible by connecting a TIG torch (sold separately). When using lift TIG welding, attach the argon flow meter to the gas bottle, and then attach it to the torch from the argon flow meter. When it comes to torch selection, the WP-26V welding gun is the best choice. ★ A function that automatically reduces the current when the LIFT TIG is short-circuited to protect the tungsten needle
  •  

Review